The installation method of the five claw fastener

[China Button Industry Network] The five-claw clasp and the four-prong clasp are composed of four parts, and two of them are the same, that is, two small iron rings with claws. They occupies five claws and engage the other side. fixed. Because the claws of the five-jaw clasp are short, they are not suitable for places that are too thick. However, they are lighter than the four-pronged clasps. In general, children's clothing or thin pouches can be used as fasteners in the summer.

One part of the five-jaw clasp is difficult to distinguish between the front and the back. It cannot be seen at all. If you look closely, the front inner edge is relatively flat, and the back has a groove, which is the face of the flute with the claws. Can only be fixed. This must be observed before installing.

The installation tool of the five-jaw clasp can be much simpler. Firstly, it does not need to punch the punch. The sharp claws can be worn from the front to the back.

The tool it uses can be used in conjunction with snap fasteners, only one of which can be used with a tapping tool. After the other half of the paw is put on the paw, the same tool can be used to hit the two parts for fixation.


Suede Leather

Suede Leather,Suede Nubuck,Suede Skin,Roughout Suede

WENZHOU MINGSHENG IMPORT&EXPORT CO.,LTD , https://www.mingshengtrading.com