Ben Wang, September 10th If a pair of hiking shoes are properly maintained, they can be used for a longer period of time.
Pre-wear maintenance: Apply suture thread and pinhole with waterproof agent to improve the waterproof degree of upper and suture. Newly purchased hiking boots should be re-applied with water repellent for a period of time. It is best to apply it one to two days before the start of the event, so that the leather is completely absorbed, and the leather is then dark brown. Nylon cloth hiking boots can be made of silicon-based spray because they are not easily waterproof.
How to wear: Try not to wear a pair of shoes for a long time. Long-term wet and fatigue environment will shorten the life of the shoes. Outdoor Sports Forum
How to wash: General water cleaning can be, but must pay special attention to after cleaning, do not put in the sun exposure, shoes, easy to open the sun after the explosion of plastic, should be placed in a cool ventilated place to let it dry naturally; not the fire heat Drying, leather will dry and crack; but you can take advantage of the upper wet when the sun exposure, not long-term!
How to store: The most sensitive to damp shoes, damp, waterproof, breathable, cortex, line and other properties of the shoes will cause damage. If you want to store for more than a few months, it is recommended that you let the shoes dry outside and then stored, placed in a cool, ventilated place, the shoes do not fold the body. It is best to remove the insole before short-term storage (after normal activities) and long-term storage, because the insole itself is more humid.
How to repair: If you open the plastic shoes, glue before the first adhesive to clean, dry and then make up.
Several types of shoe care methods:
Cortex: (LEATHER)
A. Dry cloth (weave cloth) wipes the surface dust.
B. Specially used in leather maintenance lotion once again (If you often wear shoes, do not have to wipe the maintenance lotion every time, because too much emulsion will make the leather easy to split).
C. Dry and ventilated place (For shoes that are not worn for a long time, desiccant should be built in the shoe box or shoe cabinet to prevent moulding).
Anti-fur, deerskin (NUBUD, SUEDE)
A. Use a harder shoe brush to remove dirt from the surface.
B. In the dirty area, use an eraser to abrade the dirt on the surface.
C. Brush again with the shoe brush.
D. Spray special maintenance fluid.
E. Keep it dry in a cool, ventilated place.
Canvas shoes (CANVAS)
A. Wash with water, but do not soak or use any bleach.
B. Dry place in the ventilated area (set some paper or dry cloth in the shoe, keep in mind that you should not use too much kicking to prevent the glue from overflowing or turning yellow).
Elastic material (ELASTIC)
A. Brush the surface with a shoe brush.
B. When dirty, use water and a small brush for local cleaning.
C. Place in a ventilated place.
Metal Blank Name Tags,Name Tag Metal,Logo Metal Name Tag
Topwin Metal Accessories Ltd. , http://www.gzbeltbucklt.com