Xiaobian is now giving everyone an analogy. In the summer, when the sun is hot in the sun, then the air conditioner will be turned on indoors. At this time, the door will be closed and opened again. After half an hour of air conditioning work, the indoor temperature will reach the set value. Will stop working, then, only need to pay for the air conditioning for half an hour of power consumption, but if the door and window insulation, insulation effect is not good, the air conditioner will continue to work without stopping, has been spending a lot of power, will take a lot of time Additional expenses, and more carbon dioxide emissions, pollute the environment, the same is true for heating in winter.
Now, I finally know whether aluminum alloy doors and windows are energy-saving and have such important significance in home life.
Then the question comes: What kind of doors and windows are energy-saving?
1. Broken bridge aluminum alloy doors and windows
The window profile accounts for about 15% to 30% of the area of ​​the outer window opening, which is another weak link in the energy loss of the exterior window of the building. The aluminum alloy profile of the broken bridge breaks the aluminum profile into the broken bridge by inserting the heat insulation strip into the aluminum to effectively prevent the heat conduction. It not only retains the advantages of the aluminum profile, but also greatly reduces the heat transfer coefficient of the aluminum profile. The energy saving effect is better.
Second, hardware accessories
Aluminum alloy door and window hardware is an important link to realize the function of opening the door and window and ensure the overall performance of the door and window. The hardware should not only consider the basic functions of the sash's bearing, opening form, opening angle and the matching with the profile, but also check the load of the sash in the load. The number and strength of the locks below. The quality of the hardware determines whether the switch of the door and window is smooth, and the rate of micro-repair is high.
Third, production equipment and technology
Production equipment and technology are the top priority for ensuring the sealing and quality of aluminum alloy doors and windows. The equipment and level of the broken aluminum door and window manufacturers directly affect the final quality of the doors and windows.
Fourth, the choice of window type
Aluminum alloy doors and windows are the first factor affecting energy-saving performance. Generally, the insulation performance of the casement window is higher than about 20% of the sliding window, because the heat consumption of the cold air permeation of the window accounts for a certain proportion of the heat consumption of the whole window (10%-30%). ), and the airtightness of the casement window is higher than the 1-2 grades of the sliding window. Therefore, from the perspective of energy saving, the aluminum alloy casement window should be used as much as possible.
Fifth, the installation process
After selecting the aluminum alloy doors and windows of the broken bridge, the most important part is the installation. Whether the installation of the installation master is over, whether the size of the door and window openings is appropriate, and whether the gap treatment is qualified in the later stage directly affects the final installation effect.
6. Daily maintenance
Don't think that everything will be fine when you finish the installation. In fact, even the best products need to be cherished in the daily use process. They should also be treated frequently, lightly and gently. After rainy days, clean the water on the doors and windows and the tank with a soft cloth. Clean, always check whether the hardware accessories are in good condition, and find that the damage should be replaced in time.
Environmental protection, energy conservation, and emission reduction start from us. Doing a good job of energy saving on doors and windows not only saves economic expenditure, but also makes a contribution to protecting the environment.
popular searches:  Aluminum art accessories    Luxury aluminum art villa door    Aluminum art stair railing   Aluminum art security window   Aluminum art fence    Aluminum art fence   Aluminum canopy
Cashmere is the best textile material, it is called " soft gold" in textiles, so it is definately on the top level of all garments and apparel.
We are making all kind of products related with cashmere, such as woolen or worsted cashmere scarf or Cashmere Shawl, pure cashmere scarf, cashmere scarf or shawl with jacquard or emrbroidery effection, printed cashmere shawl etc.
As cashmere is very expensive, so we also supply the products in cashmere blended with wool or modal or cotton, so the price will be cheaper.
All the pattern which is used on Wool Scarf can be used on cashmere scarf or cahsmere shawl.
Cashmere Scarf,Cashmere Shawl,100% Cashmere Scarf,Pure Cashmere Scarf,,Cashmere Scarves
Huhhot Hurray Accessories Co.,Ltd , https://www.hurrayaccessories.com